Descriptions of SAE 100R series hose. SAE 100R series. Description. 100R1. Steel wire reinforced, rubber covered hydraulic hose (one wire braid) Type A - Thick cover (skive type) Type AT - Thin cover (no-skive type) 100R2. High pressure, steel wire reinforced, rubber covered hydraulic hose (two wire braid)
838. CONSTRUCTION: This hose consists of an inner tube of oil-resistant synthetic rubber, single wire braid reinforcement, and an oil- and weather-resistant synthetic rubber cover. APPLIIONS: Hose range suitable to carry hydraulic fluids, such as glycol, mineral oils, emulsion, hydrocarbons, etc. WORKING TEMPERATURE:
sae 100r4 Construction : This hose shall consist of an inner tube of oil resistant synthetic rubber, a reinforcement consisting of a ply or plies of woven or braided textile fibers with a suitable spiral of body steel wire, and an oil and weather resistant synthetic rubber cover.
SAE J2064 TYPE C 1/2 SAE Minimum Bend Radius SAE 100R4 “Push-Lok” Multipurpose Hose Multipurpose Multipurpose Fire Resistant Cover Multipurpose - Heavy Duty Transportation Hose Liquefied Petroleum Gas SAE J2064 TYPE B Visual Index Air Brake Hose SAE J1402. A- Hose Products Division
According to: SAE J517 type SAE 100R4. Suction & Delivery Hydraulic Hose. Appliion. Hydraulic Suction or Return Hose. Cover. Flame Resistant Cover, MSHA Approved. Reinforcement. One Fiber Braid, One Helical Wire. Temperature.
SAE 100R2AT DIN EN 853 2SN According to: ISO 1436 / DIN EN 853 type 2SN / SAE J517 type SAE 100R2 AT High Pressure, Double Steel Braid Reinforced Hydraulic Hose. Our SAE 100R2AT / DIN EN 853 2SN Hydraulic Hose has a greater working and burst pressure compared with only SAE 100R2AT. Domestic SAE 100R2AT Hydraulic Hose
SAE 100 R4 Oil Suction & Delivery Hose. SAE 100 R4 oil suction and delivery hose for use in low pressure and vacuum appliions with petroleum-base hydraulic fluids within a temperature of -40ºC to +100ºC, and with water-base hydraulic fluids within the temperature ranges agreed upon by the manufacturers of both the hose and the fluid.
Tank Truck 100R4 hose is used in tank truck and in-plant operations to transfer gasoline, oil and other petroleum base products up to 50% aromatic content.It is designed for pressure, gravity flow, or full suction service. Nitrile synthetic rubber RMA Class A (high Oil Resistance. Spiral plied synthetic fabric with wir
SAE 100R4Inner Tube: Nitrile Blend Reinforcement: 3/4" - 1-1/2" 1 helical cabled wire and 1 fiber braid 2"- 1 helical, single-stranded wire and 1 fiber braid Cover: Neoprene Temperature Range:-40°F to +212°F (-40°C to +100°C) Hose Ends: Coll-O-Crimp®] U-Series for 2-20 sizes; Coll-O-Crimp® attachable K-Series; 039 K-Series; 430 E-Series for 24 and 32 sizes
100R5 DOT Textile Covered Hydraulic Hose is a general purpose hose used primarily in the transportation industry. Medium Pressure Appliions Include: Petroleum Based Hydraulic Oil, Air and Water for use in Air Brakes, Power Steering, Turbo Oil Lines, Tilt Cab Cylinders, Transmission Coolant and Filtration Lines.
About product and suppliers: hydraulic hose sae 100r hose are essential components, whether you are looking to purchase for residential or commercial purposes, for a host of distinct activities. Alibaba brings you hydraulic hose sae 100r hose of outstanding quality that are inevitable choices due to a vast nuer of features that you can avail of.
Suction and Return Line – High-Temperature 1/2 SAE Minimum Bend Radius SAE 100R4, J1942 / USCG HF These hoses coine to meet a wide range of suction and return appliion requirements. Up to one-half the SAE minimum bend radius …
SAE 100R4 According to: SAE J517 type SAE 100R4 Features: S uction and Delivery Hydraulic Hose; Flame Resistant Cover, MSHA Approved; One Fiber Braid, One Helical Wire; Temperature Range: -40°F to +212°F (-40°C to +100°C)
SAE 100R8 thermoplastic hydraulic hose - nylon tube. SAE 100R8 high pressure thermoplastic hydraulic hose is used in nonconductive appliions such as blowout preventers, lube lines and construction machinery. Petroleum based and synthetic hydraulic fluids within -40°F to 212°F are frequently used, which will not cause tube failure in specified temperature range.
1-1/2" SAE 100R4 Suction and Return Hose is recommended for low pressure or vacuum lines in hydraulic system service with petroleum and water-base fluids. Interchanges with Aeroquip FC318-24, Gates 24G4, Parker 881-24, and Weatherhead H03924. Use this product with the following hose fittings: W Series Hose Fittings. Bite-to-the-wire peformance.
The hose have longer service life as a result. Recommended For: Petroleum and water-base hydraulic fluids in suction lines or in low pressure return line. Meets or exceeds requirements of SAE 100 R4. Uses half the bend radius of SAE 100R4. Tube: Black, synthetic rubber is specifically designed for resistance to high temperatures.
Type A - Thick cover (skive type) Type AT - Thin cover (no-skive type) Construction: This hose consists of an inner tube of oil synthetic rubber, two wires braid reinforcement, and an oil and weather resistant synthetic rubber cover. Tube: Oil resistant synthetic rubber. Reinforcement: two high tensile steel wire layers 2/w Cover: Abrasion and weather resistant synthetic rubber
SAE 100R3 medium pressure hydraulic hose -double fiber braid. SAE 100R3 medium pressure hydraulic hose is ideal for medium pressure fuel and oil lines as well as return and suction hoses of hydraulic systems. Two plies of braided textile protect the inner tube in case that the outside cover is broken.
SAE 100 R1 A hydraulic hose, also called DIN EN 853 1ST hydraulic hose, is similar to SAE 100 R1 AT hydraulic hose in structure. It is also composed of three parts: tube, reinforcement and cover. Tube is made from black oil resistant synthetic rubber, making hose have excellent performance in delivering hydraulic oils.
Jul 13, 2017· Parker Hose Products Division has a full line of hydraulic hoses designed for one-half SAE bend radius at full SAE pressure, which exceeds the minimum bend radius. For example, the bend radius of Parker’s 797 hydraulic hose is half of SAE’s 100R1, 100R2, 100R4, 100R12 and 100R13 minimum requirement, which reduces hose length requirements by
Tube: Oil resistant, synthetic rubber. Reinforcement: High tensile cord and helix steel wire. Cover: Oil and weather resistant synthetic rubber. Temperature:
SAE 100R5 medium pressure hydraulic hoses for air brake system. SAE 100R5 single wire braid and textile covered hydraulic hoses are widely used in medium pressure appliions including conveying petroleum-based hydraulic oil, air and water with specified pressure to air brakes, power steering, turbo oil lines and tilt cab cylinders.
Low pressure or return line for petroleum and water based hydraulic fluids. Meets or exceeds requirements of SAE 100R4. MSHA approved. Temperature range: -40°F to 240°F. Construction. Black Nitrile tube with spiral plied synthetic fabric and a wire helix. Black Neoprene cover. Temperature Range-40°F to 240°F.
Type A - Thick cover (skive type) Type AT - Thin cover (no-skive type) Construction: This hose consists of an inner tube of oil synthetic rubber, four wire spiral reinforcement, and an oil and weather resistant synthetic rubber cover. Tube: Oil resistance synthetic rubber. Reinforcement: Four wire spiral reinforcement. Cover: Hydraulic fluid and weather resistant thermoplastic cover.
370047: Hydraulic Hose SAE 100R4 1 Spiral 20m x 19mm : £330.67 : 30% : £231.47
Specifiions. SAE J517, type SAE 100 R4. Appliion. hardwall hose used for the suction and delivery of oil in hydraulic systems. Temperature: from -40°C (-40°F) to +100°C (+212°F). Branding: continuous eossed marking “IVG SAE 100 R4 / quarter and year of production”.
2-wire braid high pressure hydraulic hose is often found in mobile equipment including farm tractor, dump truck and in-plant hydraulic equipment. SAE 100R2AT hydraulic hose has three parts - excellent oil resistance Nitrile tube, good weather and petroleum products resistance Neoprene cover and double high-tensile wire braid reinforcement.
SAE 100R4 wire inserted low pressure hydraulic hose is frequently applied to suction & return line, anti-static delivery line, and vacuum appliions for petroleum- and water-based hydraulic fluids. With superior abrasion and weather resistance, neoprene cover serves as guard to avoid hydraulic fluid leakage and protecting the inner tube.
Type A - Thick cover (skive type) Type AT - Thin cover (no-skive type) Construction: This hose consists of an inner tube of oil synthetic rubber, four wire braids reinforcement, and an oil and weather resistant synthetic rubber cover. Tube: Oil resistance synthetic rubber. Reinforcement: Four wire spiral reinforcement. Cover: Hydraulic fluid and weather resistant thermoplastic cover.
SAE100R6PM hose is made as per the specifiion SAE type 100 R6. The industry standard hose manufactured to strict international quality specifiions in order to provide consistency of performance. Designed with one-textile braid construction & meets global industry standards. It offers a long service life and a wide range of fluid