SAE 100R3 General Purpose/Hydraulic Hose. Recommended for hydraulic oil lines, anti-freeze solutions or water. Interchanges with Aeroquip 2583, Parker 601, and Weatherhead H017
SAE 100 R4 Oil Suction & Delivery Hose. SAE 100 R4 oil suction and delivery hose for use in low pressure and vacuum appliions with petroleum-base hydraulic fluids within a temperature of -40ºC to +100ºC, and with water-base hydraulic fluids within the temperature ranges agreed upon by the manufacturers of both the hose and the fluid.
SAE 100R4 wire inserted low pressure hydraulic hose is frequently applied to suction & return line, anti-static delivery line, and vacuum appliions for petroleum- and water-based hydraulic fluids. With superior abrasion and weather resistance, neoprene cover serves as guard to avoid hydraulic fluid leakage and protecting the inner tube.
370047: Hydraulic Hose SAE 100R4 1 Spiral 20m x 19mm : £330.67 : 30% : £231.47
SAE 100R5 medium pressure hydraulic hoses for air brake system. SAE 100R5 single wire braid and textile covered hydraulic hoses are widely used in medium pressure appliions including conveying petroleum-based hydraulic oil, air and water with specified pressure to air brakes, power steering, turbo oil lines and tilt cab cylinders.
The hose have longer service life as a result. Recommended For: Petroleum and water-base hydraulic fluids in suction lines or in low pressure return line. Meets or exceeds requirements of SAE 100 R4. Uses half the bend radius of SAE 100R4. Tube: Black, synthetic rubber is specifically designed for resistance to high temperatures.
1-1/2" SAE 100R4 Suction and Return Hose is recommended for low pressure or vacuum lines in hydraulic system service with petroleum and water-base fluids. Interchanges with Aeroquip FC318-24, Gates 24G4, Parker 881-24, and Weatherhead H03924. Use this product with the following hose fittings: W Series Hose Fittings. Bite-to-the-wire peformance.
Type A - Thick cover (skive type) Type AT - Thin cover (no-skive type) Construction: This hose consists of an inner tube of oil synthetic rubber, two wires braid reinforcement, and an oil and weather resistant synthetic rubber cover. Tube: Oil resistant synthetic rubber. Reinforcement: two high tensile steel wire layers 2/w Cover: Abrasion and weather resistant synthetic rubber
Tank Truck 100R4 hose is used in tank truck and in-plant operations to transfer gasoline, oil and other petroleum base products up to 50% aromatic content.It is designed for pressure, gravity flow, or full suction service. Nitrile synthetic rubber RMA Class A (high Oil Resistance. Spiral plied synthetic fabric with wir
Specifiions. SAE J517, type SAE 100 R4. Appliion. hardwall hose used for the suction and delivery of oil in hydraulic systems. Temperature: from -40°C (-40°F) to +100°C (+212°F). Branding: continuous eossed marking “IVG SAE 100 R4 / quarter and year of production”.
SAE 100R15 Hydraulic Hose for 5,000 & 6,000 psi service reducing inventory & budget SAE 100R15 high pressure hydraulic hose is reinforced by four & six alternating layers of spiral and high-tensile steel wire. 6,000 psi constant working pressure and high impulse strength make it very popular in logging, construction/mining, agriculture and oil field equipment.
838. CONSTRUCTION: This hose consists of an inner tube of oil-resistant synthetic rubber, single wire braid reinforcement, and an oil- and weather-resistant synthetic rubber cover. APPLIIONS: Hose range suitable to carry hydraulic fluids, such as glycol, mineral oils, emulsion, hydrocarbons, etc. WORKING TEMPERATURE:
IH3400-24 | 1 1/2" SAE 100R4 Hose - Black (per foot) $8.69. IH3400-32. IH3400-32 | 2" SAE 100R4 Hose - Black (per foot) $10.66. Check the items you wish to purchase, then click. Share your knowledge of this product.
SAE 100R4 According to: SAE J517 type SAE 100R4 Features: S uction and Delivery Hydraulic Hose; Flame Resistant Cover, MSHA Approved; One Fiber Braid, One Helical Wire; Temperature Range: -40°F to +212°F (-40°C to +100°C)
Parker''s Medium Pressure No-Skive Suction and Return Line Hose 811S has been designed with an Isobaric 1.0 MPa for all sizes and a temperature range from -40°C up to +100 °C. SAE 100R4 - 811S Water Compatible Fitting. on request Hose Inside Diameter. 63,5 - 152,4 mm Hose Outside Diameter. 75.0 - 172.0 mm 2
SAE 100R2AT DIN EN 853 2SN According to: ISO 1436 / DIN EN 853 type 2SN / SAE J517 type SAE 100R2 AT High Pressure, Double Steel Braid Reinforced Hydraulic Hose. Our SAE 100R2AT / DIN EN 853 2SN Hydraulic Hose has a greater working and burst pressure compared with only SAE 100R2AT. Domestic SAE 100R2AT Hydraulic Hose
SAE 100R3 Construction: This hose shall consist of an inner tube of oil resistant synthetic rubber, two braids of suitable fiber, and an oil and weather resistant synthetic rubber cover. Specifiion: Metric Size SAE Dash Size ID Min ID Max OD Min OD Max Max Working Pressure MPa Min Bend Radius 5 -3 4.5 5.4 11.9 13.5 10.5 75
Low pressure or return line for petroleum and water based hydraulic fluids. Meets or exceeds requirements of SAE 100R4. MSHA approved. Temperature range: -40°F to 240°F. Construction. Black Nitrile tube with spiral plied synthetic fabric and a wire helix. Black Neoprene cover. Temperature Range-40°F to 240°F.
Material Handling, Dredge & Mining Hoses. Continental hoses are frequently used in above-ground and underground mining appliions, in offshore technology, in material handling, large-tank units, the ironworks industry, and the building trade.
Type A - Thick cover (skive type) Type AT - Thin cover (no-skive type) Construction: This hose consists of an inner tube of oil synthetic rubber, four wire braids reinforcement, and an oil and weather resistant synthetic rubber cover. Tube: Oil resistance synthetic rubber. Reinforcement: Four wire spiral reinforcement. Cover: Hydraulic fluid and weather resistant thermoplastic cover.
China Hydraulic Hose alog of Hydraulic Hose SAE 100r2at&DIN En 853 2sn & High Pressure Rubber Hose, Hydraulic Hose SAE 100 R3 & Fiber Braid Hydraulic Hose provided by China manufacturer - Qingdao Hyrotech Rubber & Plastic Products Co., Ltd., page1.
High pressure, steel wire reinforced, rubber covered hydraulic hose (two wire braid) Type A - Thick cover (skive type) Type AT - Thin cover (no-skive type) 100R3. Double fiber braid (non-metallic), rubber covered hydraulic hose: 100R4. Wire inserted hydraulic suction hose: 100R5. Single wire braid, textile covered hydraulic hose: 100R6
Type A - Thick cover (skive type) Type AT - Thin cover (no-skive type) Construction: This hose consists of an inner tube of oil synthetic rubber, four wire spiral reinforcement, and an oil and weather resistant synthetic rubber cover. Tube: Oil resistance synthetic rubber. Reinforcement: Four wire spiral reinforcement. Cover: Hydraulic fluid and weather resistant thermoplastic cover.
Single Textile Braid. Reinforced Hydraulic Hose. Seamless Oil Resistant Synthetic Rubber. Reinforcement: 1 High Resistance Synthetic Fiber Braid. Cover is Black, Oil, Weather and Abrasion Resistant. Temperature Range: -40°F to 212°F (-40° C to 10°C) SKU. ID (in)
SAE 100R3 medium pressure hydraulic hose is ideal for medium pressure fuel and oil lines as well as return and suction hoses of hydraulic systems. Two plies of braided textile protect the inner tube in case that the outside cover is broken. Nitrile tube has premium oil resistant and won''t react with petroleum- or water-based hydraulic fluids
High Pressure Compressor Air Hose Manufacturers, Factory, Suppliers From China, If possible, be sure to send your needs with a detailed list including the style/item and quantity you require. We will then deliver our greatest price ranges to you.
SAE 100R8 thermoplastic hydraulic hose - nylon tube. SAE 100R8 high pressure thermoplastic hydraulic hose is used in nonconductive appliions such as blowout preventers, lube lines and construction machinery. Petroleum based and synthetic hydraulic fluids within -40°F to 212°F are frequently used, which will not cause tube failure in specified temperature range.
Part #: R6-04 R6-04 | 1/4" SAE 100R6 General Purpose Hose. Pressure Rating: 400 PSI alog: $1.81 Online: $1.71. General purpose/hydraulic hose with braided fiber reinforcement. Inner tube: Oil-resistant synthetic rubber. SAE 100R6 General Purpose is recommended for general purpose air, oil and water lines. No skiving required.
Hot sale SAE 100R4 Double Fiber Braid Nonmetallic Hydraulic Rubber Hose. US $0.75-$1.00 / Meter. China Supplier Hydraulic Rubber Hose SAE 100 R1AT R2AT Rubber Hydraulic Hose. US $0.67 / Meter. 500 Meters The hydraulic hose sae 100r hose come with high …
SAE100R6PM hose is made as per the specifiion SAE type 100 R6. The industry standard hose manufactured to strict international quality specifiions in order to provide consistency of performance. Designed with one-textile braid construction & meets global industry standards. It offers a long service life and a wide range of fluid