SAE 100R4 hose construction. Tube: Nitrile. Reinforcement: textile with inserted spiral steel wire. Cover: Black Neoprene (CR) Max. working pressure: 305psi (2.1Mpa) at 3/4 I.D.; Working temperature: -40 to 100 °C (-40 to 212°F); Min. bend radius: 125mm at 3/4" ID; Safe factor: 4:1; Pressure grade: low pressure.
Specifiions Met: SAE 100 R6/EN 854 R6 Maximum Operating Pressure: 2.8 - 1.3 MPa, 28 - 13 bar, 400 - 190 psi Maximum Operating Temperature: 100 °C, 212 °F
SAE 100R1 high tensile steel wire braided medium pressure hose. SAE 100R1AT single steel wire braided hose is a typical medium pressure hydraulic hose and strongly recommended for hydraulic lines or general industrial system. High tensile strength steel wire reinforcement makes SAE 100R1 hose support higher pressure than common steel wire does.
SAE 100 R1AT. Part No.: IH-R1AT Colour: Black Tube: Synthetic oil resistant rubber. Cover: Synthetic rubber – abrasion, ozone and weather resistant. Reinforcement: 1 high tensile steel wire braid. Size Available: 1/4’’ – 4’’ Temperature:-40°C +120°C. SAE 100 R1AT Use: High pressure hydraulic oils, air and water. Standards: EN 853 1SN
Single Textile Braid. Reinforced Hydraulic Hose. Seamless Oil Resistant Synthetic Rubber. Reinforcement: 1 High Resistance Synthetic Fiber Braid. Cover is Black, Oil, Weather and Abrasion Resistant. Temperature Range: -40°F to 212°F (-40° C to 10°C) SKU. ID (in)
Description. Recommended for: Meets or exceeds requirements of SAE 100R4. Tube: Black, oil resistant synthetic rubber. Reinforcement: Textile reinforcement with Helix wire. Cover: Black, oil and abrasion resistant synthetic rubber. Temperature Range: -40° to +212°F. Additional Information. Hose I.D. 1 1/2.
Oct 06, 2017· LT788 Sand Blasting Hose LT781 SAE 100R3-Oil Resistant Rubber Hose LT782 SAE 100 R4-Hydraulic Suction Rubber Hose LT 783 SAE 100R5-Hydraulic Rubber Hose LT784 SAE 100R6 Oil Hose LT785-Compressed Air Hose LT 786 Wire Steam Hose LT787 EN854-2TE-3TE -Low Pressure Oil Return Hose LT788 Sand Blasting Hose LT 789-Automotive AC Hose Series
SAE 100R4 According to: SAE J517 type SAE 100R4 Features: S uction and Delivery Hydraulic Hose; Flame Resistant Cover, MSHA Approved; One Fiber Braid, One Helical Wire; Temperature Range: -40°F to +212°F (-40°C to +100°C)
SAE 100R8 NC Hydraulic Hose Technical Specifiions: Recommended For: High pressure non-conductive hydraulic oil lines Temperature Operating Range: -40° F to +212° F Cover Construction: Abrasion, ozone, and weather resistant orange urethane. Tube Construction: Nylon Reinforcement: Two synthetic fiber braids.
SAE 100 R4 Oil Suction & Delivery Hose. SAE 100 R4 oil suction and delivery hose for use in low pressure and vacuum appliions with petroleum-base hydraulic fluids within a temperature of -40ºC to +100ºC, and with water-base hydraulic fluids within the temperature ranges agreed upon by the manufacturers of both the hose and the fluid.
Jul 13, 2017· For example, the bend radius of Parker’s 797 hydraulic hose is half of SAE’s 100R1, 100R2, 100R4, 100R12 and 100R13 minimum requirement, which reduces hose length requirements by up to 47%. The tighter bend radius means fewer bent tube fittings and longer life in appliions where machinery movement causes hoses to bend sharply.
Recommended for: Meets or exceeds requirements of SAE 100R4 Tube: Black, oil resistant synthetic rubber Reinforcement: Textile reinforcement with Helix wire Cover: Black, oil and abrasion resistant synthetic rubber Temperature Range: -40° to +212°F
SAE 100R4. Descriptions: Tube: Oil resistant, synthetic rubber. Reinforcement: High tensile cord and helix steel wire. Cover: Oil and weather resistant synthetic rubber. Temperature:-40° F / +212° F, Intermittent use up to 250° F. Appliion: Petroleum based hydraulic fluid, gasoline,
Oil-resistant synthetic rubber. SAE 100R4 Suction and Return Hose is recommended for low pressure or vacuum lines in hydraulic system service with petroleum and water-base fluids. Helical wire prevents collapse under vacuum up to 25/hg. Can be used with steel hose barbs or crimp fittings. No skiving required.
SAE 100R4 Low Temp Oil Return Hose A special low temperature hydraulic return line that meets or exceeds the requirements of SAE100R4 type hose. This hose provides good flexibility for those hydraulic appliions that operate in temperatures to -65°F Construction: Tube: Special Low temperature nitrile
Low pressure or return line for petroleum and water based hydraulic fluids. Meets or exceeds requirements of SAE 100R4. MSHA approved. Temperature range: -40°F to 240°F. Construction. Black Nitrile tube with spiral plied synthetic fabric and a wire helix. Black Neoprene cover. Temperature Range-40°F to 240°F.
Type A - Thick cover (skive type) Type AT - Thin cover (no-skive type) Construction: This hose consists of an inner tube of oil synthetic rubber, four wire braids reinforcement, and an oil and weather resistant synthetic rubber cover. Tube: Oil resistance synthetic rubber. Reinforcement: Four wire spiral reinforcement. Cover: Hydraulic fluid and weather resistant thermoplastic cover.
SAE 100 R6. Part No.: IH-RR6 Colour: Black Tube: Synthetic oil resistant rubber. Cover: Synthetic rubber – abrasion, ozone and weather resistant. Reinforcement: 1 textile braid. Size Available: 1/4’’ – 1’’ Temperature:-40°C +120°C. SAE 100 R6 Use: Low pressure hydraulic oils, air and water. Standards: EN 853 1SN
LT801-Braided Steel Wire Air Hose LT802 600 PSI High Temperature-Oil Resistant Steel Braided Reinforced Air Hose LT803 300PSI Textile Cord petroleum suction&discharge hose Flexor-SAE 100R4 Oil Return Hose 400PSI Size Wire Braid Hydraulic Rubber Hose LT692-Super High Temperature Resistant Wire Braid Hydraulic Rubber Hose LT699
Wire Braided And Textile Covered Hydraulic Hose SAE100 R5. SAE 100 R5 steel wire reinforced hydraulic hose is suitable for impacted medium pressure hydraulic petroleum-based oils, lubriing oils, overheating lubriing oil and water & air piping, such as air brake, power steering, fuel filter, turbocharger and oil cylinder of heavy commercial vehicles.
Specifiions. SAE J517, type SAE 100 R4. Appliion. hardwall hose used for the suction and delivery of oil in hydraulic systems. Temperature: from -40°C (-40°F) to +100°C (+212°F). Branding: continuous eossed marking “IVG SAE 100 R4 / quarter and year of production”.
SAE 100R series. Description. 100R1. Steel wire reinforced, rubber covered hydraulic hose (one wire braid) Type A - Thick cover (skive type) Type AT - Thin cover (no-skive type) 100R2. High pressure, steel wire reinforced, rubber covered hydraulic hose (two wire braid)
Hydraulic Hose SAE 100R4 1 Spiral 10m x 32mm. £218.63. 30%. £153.04. 370053. Hydraulic Hose SAE 100R4 1 Spiral 20m x 32mm. £437.14. 30%. £306.00.
Type A - Thick cover (skive type) Type AT - Thin cover (no-skive type) Construction: This hose consists of an inner tube of oil synthetic rubber, two wires braid reinforcement, and an oil and weather resistant synthetic rubber cover. Tube: Oil resistant synthetic rubber. Reinforcement: two high tensile steel wire layers 2/w Cover: Abrasion and weather resistant synthetic rubber
SAE 100R3 medium pressure hydraulic hose -double fiber braid. SAE 100R3 medium pressure hydraulic hose is ideal for medium pressure fuel and oil lines as well as return and suction hoses of hydraulic systems. Two plies of braided textile protect the inner tube in case that the outside cover is broken.
Tank Truck 100R4 hose is used in tank truck and in-plant operations to transfer gasoline, oil and other petroleum base products up to 50% aromatic content.It is designed for pressure, gravity flow, or full suction service. Nitrile synthetic rubber RMA Class A (high Oil Resistance. Spiral plied synthetic fabric with wir
IH3400-24 | 1 1/2" SAE 100R4 Hose - Black (per foot) $8.69. IH3400-32. IH3400-32 | 2" SAE 100R4 Hose - Black (per foot) $10.66. Check the items you wish to purchase, then click. Share your knowledge of this product.
HIGH TEMP II A807 2 Wire Braid Non-Skive 12 38-47 5,000 4,000 3,500 2,250 2,000 1,625 1,250 1,125 SAE 100R4 2004 Suction & Return Line 9 20-37 300 250 200 150 100 62 Meets or exceeds requirements of SAE 100R1 Type A. Tube: Black, oil resistant, Nitrile (NBR). Reinforcement:
This hose consists of an inner tube of oil-resistant synthetic rubber, two wire braids reinforcement, and an oil- and weather-resistant synthetic rubber cover. APPLIIONS: Hose range suitable to carry hydraulic fluids, such as glycol, mineral oils, emulsion, hydrocarbons, etc. WORKING TEMPERATURE: From -40°C up to +100°C >> top
Suction and Return Line – High-Temperature 1/2 SAE Minimum Bend Radius SAE 100R4, J1942 / USCG HF These hoses coine to meet a wide range of suction and return appliion requirements. Up to one-half the SAE minimum bend radius for standard and high-temperature …