中文

sae 100r4 super high temperature resistant oil pipe burst ocean sale in china

Pacific Hoseflex Hydraulic Rubber Hose - SAE 100 R1AT

SAE 100 R1AT. Part No.: IH-R1AT Colour: Black Tube: Synthetic oil resistant rubber. Cover: Synthetic rubber – abrasion, ozone and weather resistant. Reinforcement: 1 high tensile steel wire braid. Size Available: 1/4’’ – 4’’ Temperature:-40°C +120°C. SAE 100 R1AT Use: High pressure hydraulic oils, air and water. Standards: EN 853 1SN

HEBEI QIANLI RUBBER PRODUCTS CO., LTD. TD. 1

SAE 100R4 Construction: This hose shall consist of an inner tube of oil resistant synthetic rubber, a reinforcement consisting of a ply or plies of woven or braided textile fibers with a suitable spiral of body steel wire, and an oil and weather resistant synthetic rubber cover. Specifiion: Metric Size SAE Dash Size ID Min ID Max OD Max Max

Braid Hydraulic Rubber Hose-letone egory

LT801-Braided Steel Wire Air Hose LT802 600 PSI High Temperature-Oil Resistant Steel Braided Reinforced Air Hose LT803 300PSI Textile Cord petroleum suction&discharge hose Flexor-SAE 100R4 Oil Return Hose 400PSI Size Wire Braid Hydraulic Rubber Hose LT692-Super High Temperature Resistant Wire Braid Hydraulic Rubber Hose LT699

R1S

Reinforcement: One high tensile steel wire braids Cover: abrasion, ozone and weather resistant synthetic rubber, MSHA approved Temperature range:-40F to +212F (+248F max.) Product Details: Item # Inside Diameter: Outside Diameter: Working Pressure: Burst Presure: Bend

SAE 100R3 - Oilfield Drilling Equipment Supply & Solutions

SAE 100R3 CONSTRUCTION Tube: oil resistant synthetic rubber Reinforcement: Two fiber braids reinforcement Cover: Black, abrasion and weather resistant synthetic rubber.MSHA accepted. Appliion: Hose range suitable to carry hydraulic fluids such as glycol, mineral oils, water, fuels, lubricants, emulsion, hydrocarbons etc, to realize the conveying of liquid and the transmission …

Hydraulic Hose: SAE J517 100R1AT, 100R1A, 100R2AT, 100R2A

This hose consists of an inner tube of oil-resistant synthetic rubber, a single wire braid reinforcement, and an oil- and weather-resistant synthetic rubber cover. APPLIIONS: Hose range suitable to carry hydraulic fluids, such as glycol, mineral oils, emulsion, hydrocarbons, etc. WORKING TEMPERATURE: From -40°C up to +100°C.

High Temperature Flexible Suction and Return Line (811HT

Suction and Return Line – High-Temperature 1/2 SAE Minimum Bend Radius SAE 100R4, J1942 / USCG HF These hoses coine to meet a wide range of suction and return appliion requirements. Up to one-half the SAE minimum bend radius for standard and high-temperature …

4 Wire Hydraulic Hose SAE 100R12 - Hose in a Hurry

Inner Tube: Synthetic Rubber Oil and abrasion resistant, gray synthetic rubber cover. Temperature range: -40° to +250° Fahrenheit. No skiving required Exceeds SAE 100R12 SAE 100R12 HoseSpecifiions Item Inside Dia (in.) Outside Dia (in.) Max Working Pressure (PSI) Min Burst Pressure (PSI) Min, Bend Radius Coil Lenght.

SAE 100R4 – United Hose Inc.

SAE 100R4. Descriptions: Tube: Oil resistant, synthetic rubber. Reinforcement: High tensile cord and helix steel wire. Cover: Oil and weather resistant synthetic rubber. Temperature:-40° F / +212° F, Intermittent use up to 250° F. Appliion: Petroleum based hydraulic fluid, gasoline,

SAE 100R4 Oil S&D Hydraulic Hose - HYDRAULIC HOSE RANGE - …

sae 100r4 oil s&d hydraulic hose. polyester cord and steel wire helix temperature range :-30¡c to +80¡c conforms to : sae100r4 j517 + bs 3492. electrical resistance of cover bs 5020 (10 6 ohms/mtr) safety factor : 4 x w.p. branding : balck ink on red stripe "anti-static oil suction & discharge 10 bar (150psi) w.p sae100r4"

SAE 100R4 Suction Hose | Abbott Rubber Company

Low pressure or return line for petroleum and water based hydraulic fluids. Meets or exceeds requirements of SAE 100R4. MSHA approved. Temperature range: -40°F to 240°F. Construction. Black Nitrile tube with spiral plied synthetic fabric and a wire helix. Black Neoprene cover. Temperature Range-40°F to 240°F.

SAE 100R6 Oil Return - Fuel Hose - HYDRAULIC HOSE RANGE - Shop

ozone resistant technical specifiion tube : smooth black anti-static oil resistant nitrile rubber cover : wrapped black anti-static nitrile rubber reinforcement : textile braid conforms to: en 854 r6/1te sae j517 type 100r6 electrical resistance of cover: 106 ohms/mtr temperature range :-continuous service : -40¡c to +100¡c burst pressure

SAE 100 R4 Hydraulic Pipe, JYM Oil Suction & Delivery Hose

SAE 100 R4 oil suction and delivery hose for use in low pressure and vacuum appliions with petroleum-base hydraulic fluids within a temperature of -40ºC to +100ºC, and with water-base hydraulic fluids within the temperature ranges agreed …

SAE 100 R15 Hydraulic Hose for Petroleum-based Oil

The details of SAE 100 R15 hydraulic hose: Structure: it is composed of three parts: tube, reinforcement and cover. Tube: oil resistant synthetic rubber. Reinforcement: multiple layers of high tensile steel wire spiral in alternative directions. Cover: high quality weather, ozone and aging resistant synthetic rubber. Temperature range:-40 °C

SAE 100R4 Wire Inserted Suction Anti-static Hydraulic Hose

Product Description: SAE 100R4 hose construction. Tube: Nitrile. Reinforcement: textile with inserted spiral steel wire. Cover: Black Neoprene (CR) Max. working pressure: 305psi (2.1Mpa) at 3/4 I.D.; Working temperature: -40 to 100 °C (-40 to 212°F); Min. bend radius: 125mm at 3/4" ID; Safe factor: 4:1;

Hydraulic Hose Selection Guide

HIGH TEMP II A807 2 Wire Braid Non-Skive 12 38-47 5,000 4,000 3,500 2,250 2,000 1,625 1,250 1,125 SAE 100R4 2004 Suction & Return Line 9 20-37 300 250 200 150 100 62 NRP 2014 Suction & Return Line 9 20-37 300 250 200 150 100 62

SAE 100R4 Hose | Hose and Fittings Source

SAE 100R4 According to: SAE J517 type SAE 100R4 Features: S uction and Delivery Hydraulic Hose; Flame Resistant Cover, MSHA Approved; One Fiber Braid, One Helical Wire; Temperature Range: -40°F to +212°F (-40°C to +100°C) Use Couplings HF 43 Series or HF HY Series

DATA SHEET SAE 100 R2AT - Hydraulic Offshore Supplies

SAE 100 R2AT Hose Construction: Tube: oil resistant synthetic rubber Reinforcement: two high tensile steel wire braid Cover: abrasion and weather resistant synthetic rubber Temperature Range: ‐40°C to +100°C (+120°C max) Hose I.D. I.D. Braid O.D. W.P. T.P. B.P. B.R. Weight HOS

Hydraulic oil hose SAE/100/R4 IVG Colbachini

Characteristics. Specifiions. SAE J517, type SAE 100 R4. Appliion. hardwall hose used for the suction and delivery of oil in hydraulic systems. Temperature: from -40°C (-40°F) to +100°C (+212°F). Branding: continuous eossed marking “IVG SAE …

Hydraulic Hose: SAE J517 100R3, 100R4, 100R5, 100R6

This hose consists of an inner tube of oil-resistant synthetic rubber, two wire braids reinforcement, and an oil- and weather-resistant synthetic rubber cover. APPLIIONS: Hose range suitable to carry hydraulic fluids, such as glycol, mineral oils, emulsion, hydrocarbons, etc. WORKING TEMPERATURE: From -40°C up to +100°C >> top

Petroleum Hose - Novaflex Group - Novaflex Group

Temperature Range: -30°F (35°C) to +200°F (+93°C) Novaflex 3261 Dock Hose This is a multi-purpose hose designed for suction and discharge appliions. This dock hose is highly flexible and has an all weather cover which is resistant to oil, cuts, abrasion and gouges. The tube is resistant to petroleum products with aromatics content to 55%. Meets all US Coast

SAE 100 R2 Steel Wire Reinforced - High pressure hose

Details of SAE 100 R2 steel wire reinforced hydraulic hose:. Structure: it is composed of three parts: tube, reinforcement and cover.. Tube: high quality synthetic rubber, making the hose resistant to abrasion, corrosion and oils.; Reinforcement: two layers of high tensile braided steel wires, making the hose have excellent performance in high pressure working conditions.

SAE Hydraulic Hose – Ideal for Low, Medium and High

SAE 100R9 high pressure four spiral steel wire hydraulic rubber hose is widely used in appliions where high pressure, high abrasion and kick resistance are urgently required, petroleum base hydraulic fluids within a temperature ranging from -40 °C to +100 °C.

Hydraulic Rubber Hose SAE100R9 SAE100R10 SAE100 R12

SAE 100 R9 R10 R12 steel wire spiraled hydraulic hose is suitable for delivering petroleum-based hydraulic oils in the working temperature of -40 °C to +100 °C. It is composed of three parts: tube, reinforcement and cover. The tube is made from high quality oil resistant synthetic rubber, making the hose widely used in delivering petroleum-based hydraulic oils.

Hydraulic Hose SAE100R4,rubber hydraulic hose,flexible

SAE 100 R4 textile reinforced hydraulic hose is mainly used for oil suction and delivery in the hydraulic systems. It is composed of three parts: tube, reinforcement and cover. The tube is made from high quality black, smooth and oil resistant synthetic rubber, making the hose widely used for oil …

SAE 100R4 Suction and Discharge Hose - Hose in a Hurry

Tank Truck 100R4 hose is used in tank truck and in-plant operations to transfer gasoline, oil and other petroleum base products up to 50% aromatic content.It is designed for pressure, gravity flow, or full suction service. Nitrile synthetic rubber RMA Class A (high Oil Resistance. Spiral plied synthetic fabric with wir

Hydraulic Hose | SAE 100R4 - Pipes | Fittings

Key Features / Tech Specs & Dimensions: Material: acrylonitrile butadiene rubber (inner tube), textile yarn braid, steel spiral, synthetic rubber (outer cover) Conforms to SAE 100R4. Operating pressure up to 10 bar. Operating temperature: -40°C to 100°C. Available from 19mm to 152mm.

SAE 100R9 High pressure, four-spiral steel wire reinforced

Type A - Thick cover (skive type) Type AT - Thin cover (no-skive type) Construction: This hose consists of an inner tube of oil synthetic rubber, four wire braids reinforcement, and an oil and weather resistant synthetic rubber cover. Tube: Oil resistance synthetic rubber. Reinforcement: Four wire spiral reinforcement. Cover: Hydraulic fluid and weather resistant thermoplastic cover.

IH3400

IH3400-24 | 1 1/2" SAE 100R4 Hose - Black (per foot) $8.69. IH3400-32. IH3400-32 | 2" SAE 100R4 Hose - Black (per foot) $10.66. Check the items you wish to purchase, then click. Share your knowledge of this product.

SAE 100 R6 - fpi.ly

SAE 100 R6 Inner Tube Reinforcement Cover Synthetic rubber resistant to oils and water 1 textile braid Synthetic rubber resistant to oils and weather agents Specifiions Approvals Appliions Temperature SAE J517 - SAE 100 R6 - EN 854 R6 Low pressure hydraulic lines, return lines and draining lines from -40°C (-40°F) to

Copyright © 2020 Setone Hydraulics CO..LTD, All rights reserved.sitemap